RLGE2FE16R/S/11/28P/CEU Comnet RLGE2FE16R with 2 x 100/1000 Fx SFP and 8 x 10/100 Tx and 4 x RS-232 and 4G LTE Cellular Modem (EU Bands) and AC

ComNet product series RLGE2FE16R are substation-rated and industrially hardened layer 2 managed switches/layer 3 routers, with a unique and highly robust packet processing SCADA-aware security firewall for the most missioncritical and demanding cyber-security applications. The RLGE2FE16R is intended for deployment in environments where high levels of electromagnetic noise and interference (EMI) and severe voltage transients and surges are routinely encountered, such as electrical utility substations and switchyards, heavy manufacturing facilities, track-side electronic equipment, and other difficult out-of-plant installations. Layer 3 routing functionality allows for the participation and foundation of a corenetwork infrastructure.

Specifications

Security

• Distributed DPI Firewall
  • Profile based firewall
  • Security rules planning per service group
  • Firewall monitoring mode
  • Firewall enforcement mode
  • Firewall Learning Mode
  • IEC 101 DPI Firewall
  • IEC 104 DPI Firewall
  • IEC 61850 mms DPI Firewall
  • Modbus RTU DPI Firewall
  • Modbus TCP DPI Firewall
  • DNP3 RTU Firewall
  • DNP3 TCP Firewall
• VPN
  • IPsec Certificates X.509
  • IPsec CRL server
  • IPsec CA server
  • IPsec Dynamic Key Exchange
  • IPsec encryption AES
  • IPsec encryption 3DES
  • L3 IPsec VPN policy based
  • L3 IPsec VPN route based
  • L3 mGRE DM-VPN
  • L2 VPN GRE
• Access control
  • SNMPv1/v2/v3 Enable/Disable port
  • Port access filter per MAC / IP addresses
  • IEEE 802.1x port-based authentication
  • local APA (Authentication Proxy Access)
  • User activity report (under local APA)
  • Access Lists L2/L3/L4 Radius
  • TACACS NAT - traversal
  • VRF RMON
• Interface
  • 2 × 100/1000 SFP¹ ports
  • 8 × 10/100Base-T(X) ports (Optional 30 W PoE)
  • 8 × 10/100Base-T(X) ports (Optional, No PoE)
  • 8 × 100FX SFP ports (Optional)
  • 4 × RS-232 ports (Optional)
  • (600 - 115.2 Kbps Support)
  • 2G/3G/4G cellular modem (Optional)
• Management
  • Console serial port
  • Port management speed, auto-negotiation and Duplex
  • Backup/Restore running config
  • Conditioned/scheduled system reboot
  • Remote management-(SSHv2,CLI/HTTPS/Telnet)
  • Software upgrade via TFTP/ SFTP
  • TFTP/ SFTP Client Syslog Port mirroring
• Local Operation
  • Local USB port for emergency boot
  • Discrete outputs reporting system-alarms
  • Failsafe output relay reporting critical alarm

Networking

• Advanced Layer 2 feature-set
  • ITU-T G.8032v2 Ethernet ring
  • IEEE 802.1s MSTP
  • IEEE 802.1w RSTP, enhanced RSTP
  • IEEE 802.3ad LAG with LACP
  • IEEE 802.1q VLAN segregation
  • IEEE 802.1p per port queues
  • IEEE 802.3p
  • IEEE 802.3x.
  • DHCP Client, Server and Relay
  • QOS Prioritization, shaping, Scheduling
  • QOS functions: 8 queues tag, switch ports
  • OAM EFM IEEE 802.3ah
  • OAM CFM ITU-T Y.1731/IEEE 802.1ag
  • 1588v2 PTP Transparent Clock
  • SNTP
• Layer 3 feature-set
  • Static routing; OSPF, RIPv2 Routing; VRRP redundancy scheme
• SCADA protocol handling
  • Transparent tunneling of serial streams
  • SCADA gateway for IEC101/104, ModBus RTU/TCP
  • and DNP3
  • Terminal Server Byte/Frame mode
  • Terminal Server TCP/UDP
• Cellular Modem (Optional)
  • GPRS/UMTS or HSPA/EVDO/LTE cellular modem
• System Performance
  • Line rate L2/L3 switching throughput
  • Switching latency <10 μSec
  • 16K MAC addresses
  • 4K VLANs with port affiliation & tagging
• Multicast
  • L2 Multicast
  • IGMP snooping for traffic optimization

Mechanical

• Indicating LEDs - PWR Port Activity/Speed RUN ALM
• Enclosure - Rugged - IP 30 rated, No fans
• Weight - 1.4 Kg (DC) – 1.8 Kg (AC)
• Size, DC 8 Port Models - 73 × 148 × 123 mm (2.9 × 5.8 × 4.8 in)
• Size, DC 16TX Port Models - 80 × 148 × 123 mm (3.1 × 5.8 × 4.8 in)
• Size, DC 8TX + 8SFP Models - 102 × 148 × 123 mm (4.0 × 5.8 × 4.8 in)
• Size, AC Models - 112 × 148 × 123 mm (4.4 × 5.8 × 4.8 in)
• Mounting - DIN rail enclosure

Environmental

• MTBF - >250,000 Hours
• Storage Temperature - -40° to +85°C
• Operating Temperature - -40° to +85°C
• Operating Humidity - 5% to 95% Non-condensing²

Power

• Power input
  • See Options in Ordering Information
  • DC models have 2 redundant inputs
  • AC models have 1 input
• Power Consumption - 20 W Max (plus PoE Load if PoE version)

Power Management of 8 PoE Ports

• Power Output
  • 12 VDC: 60 W Max (30 W for two groups of 4 ports)
  • 24 VDC: 80 W Max (40 W for two groups of 4 ports)
  • 48 VDC: 120 W Max (60 W for two groups of 4 ports)
  • 110 VDC: 100 W Max (50 W for two groups of 4 ports)
  • 220 VDC: 100 W Max (50 W for two groups of 4 ports)
  • VAC: 120 W Max (60 W for two groups of 4 ports)
• PoE Group Division - Group 1: P1, P2, P3, P6; Group 2: P4, P5, P7, P8

Compliance

• IEC 61850-3 Electric Utility Substations - IEEE 1613 Class 2 Electric Utility Substations
• EN50121-4 Vibration & Shock resistance - IEC 61000 -4
• EN 60950 - NEMA TS-1/TS-2

RLGE2FE16R-S-11-28P-CEU Specifications PDF