ACMS8CBK1 Altronix Kit includes VR6 Voltage Regulator and ACMS8CB Dual input Access Power Controller

Altronix ACMS8 and ACMS8CB dual input design allows power to be steered from two (2) independent low voltage 5 to 24 VDC power sources into eight (8) independently controlledfuse or PTC protected outputs. In ACMS8, these power outputs can also be converted to dry form “C” contacts. Outputs are activated by an open collector sink, normally open (NO) ornormally closed (NC) dry trigger input from an Access Control System, Card Reader, Keypad, Push Button, PIR, etc

Specifications

Input

• Voltage Range
  • ACMS8CB - 5VDC to 24VDC up to 10A each or 16A total input.
  • Current Consumption - 0.6A @ 12V, 0.3A @ 24V with all relays energized
• Main Fuse Rating - 10/32A
• Trigger Inputs
  • Eight (8) individually controlled trigger inputs
    • Normally open (NO) inputs
    • Normally closed (NC) inputs
    • Open collector sink inputs
    • Wet Input (5VDC - 24VDC) with 10K resistor
    • Any combination of the above

Outputs

• ACMS8CB - PTC protected outputs rated @ 2A per output, Class 2 power-limited. Total output 16A max. Do not exceed the individual power supply ratings
• Eight (8) selectable 5VDC - 24VDC independently controlled outputs or eight (8) indepently controlled Form “C” relay outputs
  • Fail-Safe and/or Fail-Secure power outputs
  • Form “C” Relays. 28VAC or VDC @ 2.5A Rated
  • Auxiliary power outputs (unswitched)
  • Any combination of the above
• Any of the eight (8) fuse protected power outputs are selectable to follow power Input 1 or Input 2
• Individual outputs may be set to OFF position for servicing

Output Ratings

• ACMS8CB - PTCs are rated 2A each
• Total output current is determined by the power supply(ies), not to exceed a maximum of 10A for each input

Fire Alarm Disconnect

• Supervised - Latching or non-latching, individually selectable for any or all of the eight (8) outputs
• EOL - 10K Resistor

Indicators (LED)

• Red LEDs - Outputs are triggered (relays energized)
• Blue LED - FACP disconnect is triggered

Individual voltage LEDs

• Green - 12VDC
• Red - 24VDC

Agency Listings

• UL 294 7th Edition - Access Control System Units
• ULC-S319 - Electronic Access Control Systems

Physical and Environmental

• Dimensions (W x L x H) - 7.65" x 4.125" x 1.25" (194.3mm x 104.8mm x 31.8mm)
• Product Weight - 0.7 lb. (0.32 kg)
• Shipping Weight - 0.95 lb. (0.43 kg)
• Temperature
  • Operating - 0°C to 49°C (32°F to 120°F)
  • Storage - -20°C to 70°C (-4°F to 158°F)
• Relative Humidity - 93% +/-5%
• BTU/Hr. (approx.) - 4 BTU/Hr

ACMS8CBK1 Specifications PDF