The cart is empty.
Dealers. First. Always.
DWG

500734-SM40 Muxlab 6G-SDI Extender Over Fiber Optic with Return Channel SM40

SKU: 500734-SM40
  • Extend up to 4K @ 30Hz resolution from 985ft (300m)over OM3 MM fiber to 265000ft (80km)over SM fiber
  • Supports multichannel transmission, and can simultaneously transmit up to 9Gbps of data
  • Supports one input and one output SDI port, plus three configurable directional SDI ports
  • Supports RS232 pass-through for remote control and as a return channel for tally light and camera control unit (CCU)
  • Supported modes: SMPTE 292M, SMPTE 296M, SMPTE 372M, SMPTE 424M, SMPTE 425M
  • Supports all 6G channel configurations (1, 2, or 4 BNC)
  • Automatic SDI Link recognition and configuration
  • Supports a standard SFP+ module for the optical fiber interface, or other media
More details...
MSRP Price: $5,720.00
Online Price: $3,918.00
Save to my Wish List
Product Details

The 6G-SDI Extender over Fiber Optic with Return Channel is a unique solution from MuxLab for extending SDI cameras or other SDI sources in up to 4K resolutions to a distance of up to 400m (1300ft) using OM4 multi-mode fiber (model 500734), 10km(33,000ft) using single-mode fiber (model 500734-SM10), 40km (132,000ft) using single-mode fiber (model 500734-SM40), and 80km (264,000ft) using single-mode fiber (model 500734-SM80)


Specifications


  • Environment - 6G-SDI, 3G-SDI, HD-SDI digital signal transmission
  • Serial Interface - RS232 Serial transmission
  • Enclosure - Aluminum casing, 4.3” x 4.3” x 1” (10.9 x 10.9 x 2.54cm), for TX and RX (black in color)
  • Control - Serial console emulation with USB interface
  • Front panel (RX) - 5x BNC, SDI connectors (1 input, 1 output, 3 input/output)
  • Rear panel (RX) - SFP+ connector for optical fiber cable interface Terminal Block for RS232
  • Top panel (RX) - Mini USB for firmware updates and status LEDs
  • Side panel (RX) - Locking power jack(supports a +12VDC to +48VDC voltage range)
  • Front panel (TX) - 5x BNC, SDI connectors (1 input, 1 output, and 3 configurable as input/output)
  • Rear panel (TX) - SFP+ connector for optical fiber cable interfaceTerminal Block for RS232
  • Top panel (TX) - Mini USB for firmware updates and status LEDs
  • Side panel (TX) - Locking power jack (supports a +12VDC to +48VDC voltage range)
  • Connectors (SDI in) - 1BNC connectors for SDI input (0.8V pp, 75 ohm)
  • Connectors (SDI out) - 1BNC connectors for SDI output (0.8V pp, 75 ohm)
  • Connectors (SDI in/out) - 3BNC connectors
  • Connectors (Control) - Mini USB, for configuration and firmware updates
  • Connectors (Fiber) - SFP+ Connector for dual optical fiber cable interface
  • Connectors (Power) - One standard 2.1mm locking Power Jack
  • Compliance - FCC, CE, RoHS
  • Power - 2x 12V DC external power supplies with US, UK and Euro blades
  • Signal Distance
    • Multi-mode OM3 fiber-985ft(300m),OM4 fiberlength -1300ft(400m)
    • Single-mode fiber-33,000ft(10km), 132,000ft(40km)and 264,000ft(80km) depending on model
  • Order information - 500734-SM40 6G-SDI Extender over SM Fiber Kitwith Return Channel – 40km(UPC: 627699807347)

500734-SM40 Specifications PDF

500734-SM40 Manual


Product Reviews

Write your own review

 

Rate this product:


DWG - 800 Shames Drive , Westbury , NY 11590 , USA - 516-933-4900
Connect with us on Social Media   Facebook   Instagram   Twitter   Linked In