500755-AMP-RX-US Muxlab Audio / AMP over IP RX Extender with AMP 50W/CH

The Audio / AMP over IP ExtenderKit,with Mic & AMP 50W/CH consists of a Transmitter (500755-AMP-TX) and a Receiver (500755-AMP-RX), sold as a Kit or separately,allowing a one of two 2CH analog audio-inand Mic-insignalsto be extended over an IP network, and up to 330ft (100m) from an Ethernet Switch via Cat5e/6 cable in a point-to-point configuration. Point-to-multipoint and multipoint-to-multipoint is supported by connecting several Transmitters and Receivers to the same local Ethernet network

Specifications

• Environment - 2CH analog audiodistribution over multiple zones via an IP network
• Devices - 2CH audio source equipment, microphone systems, speakers, PA systems
• Signal Bandwidth - 20Hz to 20KHz
• LCD Display - 2 line x 20 character backlit LCD display (on TX)
• Control - Local control via front push/turn knob and LCD display, remote control via web interface and 500811 controller (on TX)
• Audio Signals - Two (2) 2CH analog audio in, One (1) Mic in, One (1) SPDIF Out (2CH digital audio)
• Connectors
  • Two (2) RCA receptacle for Analog Audio In (on TX)
  • One (1) 3.5mm jack for Analog Audio In (on TX)
  • One (1) 3-pin phoenix connector for Mic In (on TX)
  • One (1) RCA receptacle for SPDIF Out (on RX)
  • Two (2) RJ45S for Cat 5e/6 unshielded or shielded twisted pair (one for TX and one for RX)
  • Two (2) 3.5mm jack for IR Emitter or IR Sensor (one for TX and one for RX)
  • Two (2) DB9 Serial Ports for RS232 (one for TX and one for RX)
  • Two (2) 8-position DIP Switches for device ID addressing and config (one for TX and one for RX)
  • One (1) 4 pin phoenix connector speaker terminals (2x50W into 8Ω)
  • Two (2) 2.1mm locking power connector (one for TX and one for RX)
• Cable - One (1) Cat 5e/6 or better twisted pair cables required
• Maximum Distance - Cat5e/6 : 330ft (100m)
• IR Frequency - Directional IR: 38KHz to 56KHz
• RJ45 Pin Configuration (Reverse Polarity Sensitive. Use EIA/TIA 568A or 586B straight-through wiring)
  • RJ45 Link
  • Pin 1 (R)
  • Pin 2 (T)
  • Pin 3 (R)
  • Pin 4 (R)
  • Pin 5 (T)
  • Pin 6 (T)
  • Pin 7 (R)
  • Pin 8 (T)
• Power Source
  • Transmitter : Supports PoE (PD), an external power supply is not included. It is intended to be powered via a PoE (PSE) Ethernet Switch. If required, an optional power supply (500993) may be purchased separately
  • Receiver : Includes a power supply(160W maximum, 32VDC5A)
• PoE Standard - IEEE 802.3 af
• Power Consumption
  • Transmitter : 3W
  • Receiver : 160W(max)
• Temperature
  • Operating : 0° to 40°C
  • Storage : -20° to 85°C
  • Humidity : Up to 90% non-condensing
• Dimensions
  • TX : 4.33” x 4.76” x 1.97” (11x 12.1x 5 cm)
  • RX : 4.33” x 7.91” x 1.97” (11 x 20.1 x 5 cm)
• Weight
  • TX : 1.20lbs (0.55kg)
  • RX : 1.96lbs (0.89kg)
• Compliance
  • Regulatory : FCC, CE, RoHS
  • Flammability : 94V0
• Warranty - 3 years
• Order Information - 500755-AMP-RX-US AUDIO / AMP over IP Receiver, with AMP 50W/CH, US(UPC: 627699817551)
• Accessories
  • 500755-70V 70V Audio Converter
  • 500917 Wall Mount Transceiver Bracket Kit
  • 500920 16-Port Rackmount Transceiver Chassis
  • 500993 Univ. Locking Power Supply 5VDC/2.6A US/UK/EU Blade
  • 500994 IR Sensor
  • 500998 IR Emitter

500755-AMP-RX-US Specifications PDF

500755-AMP-RX-US Manual