SWX-RWS-G SimpleWorx Remote Wall Switch - Grey

The RWS Remote Wall Switch is a auxiliary rocker switch designed to provide three-way or multi-way lighting control to a SimpleWorx Wall Switch Transmitter or Receiver. The RWS connects to a Wall Switch (WST or WSR) via the yellow “traveler” wire to provide three-way or multi-way control.Pressing the remote’s paddle style rocker switch will cause the WS Wall Switch (sold separately) to react the same as if its own local rocker switch was pressed. The RWS can be wired as far as 1000 feet away. A red LED is provided on top of the rocker to find the switch in the dark.

Specifications

Electrical

• Power Requirements - Primary: 120 Volts AC, 50/60Hz Single Phase
• Neutral Wire - Required
• Connections/Power Wire - 16 AWG gauge 105 C insulation, Black – Hot/Line, Grey– Neutral, Yellow - Traveler, Ground – 18 AWG stranded copper
• Standby Power Consumption - < .8 Watts
• Load Type - NA
• Maximum load - NA
• Environmental Conditions - Indoor Use Only, Temperature : -40° to 140°F (-40° to 60°C),Humidity : 10% to 90% RH (non-condensing)
• Certifications - Safety tested for USA and Canada ETL tested to UL508, UL-508-2010 CSA C22.2 #14-2010

Operation

• Status LED Modes - Red = Operation Mode
• Transmission Channels - 0
• During Power outage - Retains all settings in Non-volatile EERPOM

Mechanical

• Colors - White, Almond, Light Almond, Ivory, Black, Brown, Gray
• Paddle Type - Decorator Style True Rocker
• Set Button - Paddle
• Wire Nuts - 4 included
• Mounting - Single Gang or multiple-ganged junction box
• Dimensions - Height : 4.25 in Width : 1.68 in Depth : 1.37 in
• Weight - 4.55 oz.
• Warranty - 5 years
• US Patent No. - 6,734,784; 6,784,790; 7,265,654; 7,688,183. U.S. and foreign patents may be pending

Modes Descriptions

• Normal - Power Is applied to device
• Link - Press and Hold Rocker or Button for >6 sec.
• Link Exit - Tap while in Link Mode
• Test Mode - 5 taps while in NORMAL Mode of a Transmitter
• TEST Mode Exit - 1 tap while in TEST Mode
• Signal Strength Mode - 6 taps while in NORMAL Mode of a Receiver
• Noise Strength Mode - 7 taps while in NORMAL Mode of a Receiver
• Factory Default - 10 taps while in LINK Mode

LED Indicator Status

• Red - Normal Mode Power Applied
• Blinking Green - Link Mode
• Flashes Green - Transmitting
• Dark/Green - Test Mode
• Pulses Green 1-16X - Same Phase/ Signal Strength Display Mode of a Receiver
• Pulses Red 1-16X - Opposite Phase / Signal Strength Display Mode of a Receiver
• Pulses Orange 1-16x - Relative Noise Strength at Receiver
• Blinks Red 10x - Indicates that device has been factory defaulted

SWX-RWS-G Manual