RM1-15-BR PulseWorx Receptacle Module - Brown

The RM1 is ideal to remote control one or more 120VAC non-dimming appliances with a maximum rating of 15 Amps. The RM1 will replace any standard wall outlet with no additional wiring required. The top outlet is being controlled, while the lower outlet allows vacuums, computers, and other devices that do not require remote control to be plugged in to the normal electrical circuit.

Specifications

Electrical

• Power Requirements - Primary: 120 Volts AC, 50/60Hz
• Maximum Load - 15 AMps or 1/2 HP
• Transmission Channels - 1 Scene on Auto Off Time out
• Load type - Motor, Inductive, Incandescent, LED
• Connections - Colored Screws: Brass Screw (Lower Right) - Hot/Line, Brass Screw (Upper Right) - Load, Silver Screw (Upper, Middle Left) - Neutral, Green Screw (Lower Left) - Ground
• Standby Power - < .8 Watts
• Environmental - Recommended for Indoor Use Only
• Temperature: - -40° to 140°F (-40° to 60°C)
• Humidity - 10% to 90% RH (non-condensing)
• Certifications - ETL Pending

Operation

• Status LED Indicator - All programmable with UPStart - Blue, Red, Magenta or Off
• During Power outage - Retains all settings in Non-volatile EERPOM
• Set-Up Mode - Tap Program button 5 Times - LED will blink

Mechanical

• Colors - White, Light Almond, Ivory, Black, Brown, Grey
• Program Button - Located in upper ground hole
• Status LED - Located in lower ground hole
• Mounting - Single Gang or mulitple-ganged junction box
• Height - 3.31 in
• Width - 1.20 in
• Depth: - 1.90 in
• Weight - 3.40 oz
• Warranty - 5 years
• US Patent No. - 6,734,784; 6,784,790; 7,265,654; 7,688,183. U.S. and foreign patents may be pending.

RM1-15-BR Specifications PDF

RM1-15-BR Manual