WS-120V Relay Dimming Wall Switch Dimmer 120V

When LED fixtures are installed in office or residential locations it is best to provide a way to change their illumination level for different usages of the space. Those using the space often perceive LED lighting as much brighter or harsher than the lighting it replaces and that can quickly lead to complaints post install. WS-120V version and WS-277V version are available.

Specifications

Model

• WS-120V - Wall Switch Relay Dimmer - 15A

Electrical

• Power Requirements - Primary: WS-120V for 120 Volts AC, 50/60Hz or WS-277V for 277 Volts AC, 50/60Hz
• Neurtral Wire - Required
• Load Type - 0-10V LED driver
• Transmission Channels - 2 Links/Scenes
• Connections/Power Wire - 16/20 AWG gauge 105 C insulation, Black ™ Hot/Line (14 AWG for 20A)White ™ NeutralRed ™ Load(14 AWG for 20A)Yellow - traveller (controlled by RWS)
• Standby Power Consumption - < .8 Watt
• Environmental Conditions - Indoor Use OnlyTemperature: -40™ to 140™F (-40™ to 60™C)Humidity: 10% to 90% RH (non-condensing)
• Certifications - Safety tested for USA and Canada to ETL tested to UL508UL-508-2010 CSA C22.2 #14-2010

Operation

• Status LED Modes - All programmable with UPStart Blue, Red, Magenta or Off
• During Power outage - Retains all settings in Non-volatile EERPOM
• Set-Up Mode - Tap Top or Bottom Rocker 5 Times - LED will Blink

Mechanical

• Button Type - 2 Momentary contact type buttons
• Wire Nuts - 4 included
• Mounting - Single Gang or multiple-ganged junction box
• Dimensions - Height: 4.25 in Width: 1.70 in Depth: 1.37 in
• Weight - 5.0 oz
• Warranty - 5 years
• US Patent No. - 6,734,784; 6,784,790; 7,265,654; 7,688,183. U.S. and foreign patents may be pending.

WS-120V Manual