ISM4-120V GreenWorx Input Sense Module 120V

The Input Sense Module is a surface-mount module that provides four independent low-voltage contact closure input triggers to the GreenWorx lighting control system. These inputs can be connected to any Class 2 low-voltage devices such as switches, motion sensors, photo sensors, etc. to trigger pre-set events stored in the GreenWorx system controller.

Specifications

Electrical

• Power Requirements - 120/277Volt AC, 50/60Hz: 3 Phase
• Connections/Power Wire - Terminal , 12-14 AWG guage - solid or stranded, Black - Line, White - Neutral
• Standby Power Consumption - < 1/2 Watt

Ratings

• Channels - 4
• Input Type - Class-2 low voltage contact closure
• Relay Life Cycle - 100,000 on/off operations at full electronic ballast load
• Connectors - 6 position Wago #253 series or equivalent
• Guage - 16-20 Solid or Stranded AWG

Operation

• Memory - Internal Flash, External EEPROM
• Status LED - SETUP mode = Blinks GREEN, TEST mode = Blinks ORANGE, Transmitting Data = Blinks RED, Receiving Data = Blinks GREEN/RED, Lost or no Heartbeat = Slowly blinks GREEN, Factory Default = Blinks RED rapidly

Environmental

• Operational Temperature - -40° to 194° F (-40° to 90° C)
• High Temperature models - -40° to 240° F (-40° to 115° C)
• Humidity - 10% to 90% RH (non-condensing)
• Heat Dissaipation - .82W
• Certifications - Safety tested for USA and Canada ETL tested to UL508

Mechanical

• Enclosure
• Mounting - Locate near Ballast
• Length - 4.90 in (125 mm)
• Width - 2.35 in (60 mm)
• Depth - 1.4 in (60 mm)
• Weight - 6.1 oz (173 g)