The cart is empty.
Dealers. First. Always.
DWG

CLFE4+2SMSC Comnet 10/100TX Drop/Insert/Repeat 4TX/2EX Self-Managed Ethernet Switch Coax Model

SKU: CLFE4+2SMSC
  • 10/100 Mbps Ethernet
    • 4 × 10/100Mbps RJ-45 Ports
    • 2 × 10/100Mbps UTP/Coax Extended Distance Ports
  • Electrical ports support Auto-Negotiation for 10 Mbps or 100 Mbps, full duplex or half duplex data
  • Extended distance ports are switch-selectable for 10 Mbps or 100 Mbps data rate, 1 pair or 4 pair in UTP mode
  • IEEE802.3at PoE+ 30W (PoE models only)
  • Automatic MDI/MDI-X crossover
  • Full 10/100 Mbps Bandwidth
  • Supports Multicast, Unicast
  • Voltage transient protection on all power and signal input/output lines provides protection from power surges and other voltage transient events.
More details...
MSRP Price: $1,312.50
Online Price: $1,066.25
Save to my Wish List
Product Details

The ComNet CLFE4+2SMS[POE](C,U) is a six-port Ethernet switch with add/drop/repeat functionality and provides 4 copper ports operating at 10/100Mbps and is designed to combine four electrical ports along with the incoming Cat5, UTP or Coax CopperLine extension port into a further CopperLine extension port that forwards this data to the next CopperLine network device.


Specifications


Data

  • Data Interface - Ethernet
  • Data Rate - 10/100 Mbps, IEEE 802.3 Compliant, Full Duplex or Half Duplex Electrical Ports

Extended Distance Ethernet

  • Media
    • COAX - RG59/U
      • Data Rate - 10M, 100M
      • Extended Distance - 5,000 ft 1,524 m, 2,000 ft 610 m
    • UTP - 4 pair
      • Data Rate - 10M, 100M
      • Extended Distance - 3,000 ft 915 m, 2,000 ft 610 m
    • UTP - 1 pair
      • Data Rate - 10M, 100M
      • Extended Distance - 3,000 ft, 915 m

Connectors

  • Power - Terminal Block
  • Ethernet - RJ45
  • Extended Distance - Coaxial (C):female BNC, UTP (U): RJ-45

POE Pin Assignment - RJ45 port supports IEEE802.3at End-point Positive (VCC+): RJ45 pin 1, 2 Negative (VCC-): RJ45 pin 3, 6


Power

  • Operating Voltage - 48 to 56 VDC PoE, 9 to 24 VDC non-PoE
  • Current Draw - 5A, with PoE, 1A w/out PoE
  • Current Protection - Automatic Resettable Solid-State Current Limiters

Electrical & Mechanical

  • Indicator LEDs - Uplink/Data Activity Electrical Link/Data Activity, Power, PoE
  • Surface Mount - Wall or Flat Surface Screw Attachment
  • Circuit Board - Meets IPC Standard
  • Size - 6.1 × 5.3 × 2.2 in (15.5 × 13.5 × 5.6 cm)
  • Number of Rack Slots - 2 (Although the units may be mounted inside a ComNet rack, the PoE models cannot be powered from the built-in rack PSU; they must be powered by an external 48 to 56 VDC PSU.)
  • Shipping Weight - <2 lb / 0.9 kg

Environmental

  • MTBF - >100,000 hours
  • Operating Temp - -40˚ C to +75˚ C
  • Storage Temp - -40˚ C to +85˚ C
  • Relative Humidity - 0% to 95% (non-condensing)²

Ethernet Standards

  • IEEE 802.3at PoE+ (PoE Models Only)
  • RFC: 768 UDP, 2068 HTTP, 793 TCP, 791 IP, 1783 TFTP, 894 IP over Ethernet

CLFE4+2SMSC Specifications PDF

CLFE4+2SMSC Manual


Product Reviews

Write your own review

 

Rate this product:


DWG - 800 Shames Drive , Westbury , NY 11590 , USA - 516-933-4900
Connect with us on Social Media   Facebook   Instagram   Twitter   Linked In