TANGO8A Altronix 5.4 Amp 12VDC or 2.7 Amp 24VDC Access Control Power Supply in UL Listed NEMA 1 Indoor 12" W x 15.5" H x 4.5" D Electrical Enclosure 802.3bt PoE

Altronix Tango8A PoE Driven Power Supply with Access Power Controller converts an IEEE802.3bt (4PPoE) input into eight (8) regulated 24VDC and/or 12VDC outputs up to 65W. It eliminates the need for a high voltage inside of an enclosure. Tango8A is designed to support a single 12VDC LiFePO4 (Lithium Iron Phosphate) battery for 12VDC and 24VDC backup.

Specifications

Ethernet Input

• 802.3bt PoE up to 90W (or 802.3at up to 30W or 802.3af up to 15W)

Power Output (when using 802.3bt 90W)

• 12VDC up to 5.4A (65W) and/or 24VDC up to 2.7A (65W).
• Combined output not to exceed 65W
• When charging batteries : 12VDC up to 4.6A (55W) and/or 24VDC up to 2.3A (55W), Combined output not to exceed 55W.

Ethernet Output

• Pass-through Ethernet Port (data only).

Battery Charging Circuit

• 12VDC battery charger for Lithium Iron Phosphate Battery (LiFePO4 only).
• Unique technology allows for single battery to backup
• 12VDC and/or 24VDC systems

Supervision

• Loss of PoE Input
• Battery Supervision

Indicators (LED)

• Input - Indicates input voltage is present
• Output - Indicates normal operating condition
• PoE Type - PoE Class Indicator
• Supervision - PoE Fail or BAT Fail

ACMS8/ACMS8CB Access Power Controller

Inputs

• 12VDC and 24VDC from Tango1B, factory wired.
• Current Consumption - 0.6A @ 12V, 0.3A @ 24V with all relays energized
• Main Fuse Rating - 15/32A.

Trigger Inputs

• Eight (8) individually controlled trigger inputs
• a) Normally open (NO) inputs
• b) Normally closed (NC) inputs
• c) Open collector sink inputs
• d) Wet Input (5VDC - 24VDC) with 10K resistor
• e) Any combination of the above

Outputs

• Tango8A - Eight (8) Fuse protected outputs rated @ 2.5A per output, non power-limited. Total output 20A max
• Do not exceed the individual power supply ratings
• Eight (8) selectable 12VDC or 24VDC independently controlled outputs or eight (8) indepently controlled Form “C” relay outputs:
• a) Fail-Safe and/or Fail-Secure power outputs.
• b) Form “C” Relays. 28VAC or VDC @ 2.5A Rated.
• c) Auxiliary power outputs (unswitched).
• d) Any combination of the above.
• Any of the eight (8) power outputs are selectable for 12VDC or 24VDC.
• Individual outputs may be set to OFF position for servicing.

Output Ratings

• Fuses are rated 2.5A each, PTCs are rated at 2A.

Fire Alarm Disconnect

• Supervised - Latching or non-latching, individually selectable for any or all of the eight (8) outputs
• EOL - 10K Resistor.

Indicators (LED)

• Red LEDs - Outputs are triggered (relays energized).
• Blue LED - FACP disconnect is triggered
• Individual voltage LEDs - Green - 12VDC, Red - 24VDC

Physical and Environmental

• Dimensions (L x W x H) - 15.5” x 12” x 4.5” (393.7mm x 304.8mm x 114.3mm).
• Product Weight - 9.7 lb. (4.08 kg).
• Shipping Weight - 11.0 lb. (4.67 kg).
• Operating Temperature - 0°C to 49°C (32°F to 120°F).
• Storage Temperature - -20°C to 70°C (-4°F to 158°F).
• Relative Humidity - 85% +/-5%.
• BTU/Hr. (approx.) - 54 BTU/Hr

TANGO8A Specifications PDF