FPO150-D8PM8PNL4E2 LifeSafety Power 8 Door 12 Amp 12VDC 8 Managed and 8 Auxiliary Class II Distribution Outputs Access Control and CCTV Power Supply in UL Listed Indoor 16" W x 20" H x 4.5" D Electrical Enclosure

This unit is a 12V or 24V DC single voltage network managed access power system.

One M8 managed module provides eight access inputs capable of voltage or dry contact activation, and eight network managed outputs programmable for failsafe / failsecure and fire alarm input. One D8 module provides eight continuous auxiliary outputs.

Specifications

Input Power

• Input 120/230 VAC 50/60 Hz | 170 Watts (1.41 Amps)
• Overload and short circuit protection
• Over temperature protection
• Polarized AC power supply disconnect

Output Power

• 12A@12V or 6A@24V DC, 150W maximum output power
• Outputs: Continuous (DC1) Resettable (DC2)
• 8 managed outputs, fused at 3A each
• 8 auxiliary outputs, fused at 3A each
• 120 mV output voltage ripple
• System Efficiency: 88% | System BTU Rating: 66 BTU/Hr

Battery Charging

• Independent built-in 2A charger for sealed lead acid or gel type batteries
• Microprocessor dual rate charging of 12 or 24 V battery sets
• Charges up to 80Ah battery sets within UL limit
• Automatic switchover to standby battery when AC fails
• Zero transfer time when switching over to battery backup

Supervision

• AC Fail (form "C" contacts)
• System Fault (form "C" contacts) may be triggered by low/no battery, short to earth ground, power supply failure or blown fuse

Visual Indicators

• AC input, DC1 and DC2 output
• System fault | AC fault | Short to earth ground | Reverse battery polarity
• Fire Alarm Input activated
• Output LEDs - OutSmart dual color: 24V/Blue, 12V/Green
• M8: DC input, output and Fault
• D8: DC output

Regulatory Compliance

• UL294, UL603, UL1076, ULC S318, ULC S319, ULC S527, CSA C22.2 #107.1, CSA C22.2 #60950
• FCC Part 15, Subpart B / CSFM Approved

Enclosure Dimensions

• Size: 20.00H x 16.00W x 4.50D in.

FPO150-D8PM8PNL4E2 Specifications PDF