XPE-2500 Luxul PoE+ Injector

The Single Port PoE+ (Power Over Ethernet) Injector delivers both data and electrical power to PoE enabled devices using standard Ethernet cable. This eliminates the need to place devices (i.e. wireless access points) near a power outlet, allowing for greater installation flexibility, while also reducing installation and labor costs. PoE enabled devices may be placed up to 328 feet (100 meters) away from the POE Injector. Power Cord included in this kit. Your Ethernet cable is required.

Specifications

General Specifications

• Standards - IEEE802.3, IEEE802.3u, IEEE802.3ab, and IEEE802.3af/ at standards
• Output Voltage - 51V 0.6A
• Output Power - PoE: 15.4W, PoE+: 30W
• Input Voltage - AC100-240V 0.8A 50 60Hz
• Ports - 2-10/100/1000Mbps RJ45, 1-Power Input
• Cable - Cat5e or better
• LEDs - PoE: Indicates power is being passed to the Connected 802.3af/at PoE device, PWR: Power is connected to the PoE Injector
• Dimensions W x D x H - 5.25” (133.35mm) x 2.375” (60.32mm) x 1.3125 (33.34mm)
• Weight - Item: .75 lbs (.34Kg) with power cord, Packaging: 1 lbs (.46Kg)

Environmental Specifications

• Operating Temperature - 32°F to 104°F (0°C to 40°C)
• Storage Temperature - -40°F to 158°F (-40°C to 70°C)
• Operating Humidity - 0% to 90% (Relative Humidity Non-condensing)
• Storage Humidity - 10% to 90% (Relative Humidity Non-condensing)
• PoE LED
  • On: Indicates the PoE Injector is delivering power to the connected 802.3af/at PoE enabled device
  • Off: Indicates no power is being delivered to the connected device
  • Flashing: An error indicating a power fault
• Power LED
  • On: Power is connected to the PoE Injector
  • Off: Injector is not receiving power
• Data & Power Out - Delivers power and data (via Ethernet cable) to the connected PoE enabled device
• Data In - Connects to your data source over Ethernet cable
• Power - 100-240V input voltage

XPE-2500 Installation Guide PDF