PS60 Bogen Platinum Series 60W Public Address Amplifier

The Platinum Series model lineup includes the PS60 (60W), PS120 (120W), PS240 (240W), and PS600 (600W). Bogen’s Platinum Series Public Address Amplifiers offer powerful features rarely found in other commercial amplifiers – such as a 5-band full parametric EQ.

Specifications

• Power Rating (RMS) - 60 watts
• Frequency Response - 20 Hz to 20 kHz, +0/-2 dB @ -2 dB
• Distortion - 0.3% (typ.), 20 Hz to 20 kHz
• Signal-to-Ratio Noise - Fundamental: -70 dB or better; AUX 1 & 2: -70 dB; TEL: -70 dB or better @ 600-ohms; MIC 1 through MIC 6: -60 dB or better @ 200 ohms
• Inputs/Outputs - MIC: 6 Lo-Z balanced via 4 XLR connectors and 2 pluggable screw terminals, Sensitivity: 11mV (200 ohms), AUX: 2 Hi-Z RCA jacks, Sensitivity: 0.085V (10k ohms), TEL: Pluggable screw terminals. Sensitivity: 0.07V (600 ohms), Power Amp In/Pre Out: In 1V/Out 1V via RCA jacks, Tape Output: 700 mV @ Rated Output via RCA jack
• Speaker Output - 8-ohm, 25V/70V
• Output Regulation - Better than 2 dB from no load to full load
• AC Input Voltage - 100-240VAC, 50/60 Hz
• AC Current - PS60: 0.83A; PS120: 1.55A; PS240: 2.37A; PS600: 5.30A
• Variable Mute Range - -60, -21, -10, 0 dB (AUX 1 & AUX 2)
• ALC - Distortion: less than 0.5%; Compression: 25 dB (TEL)
• VOX Threshold - TEL Input 20 mV (VOX control max. CW position)
• MIC/AUX/TEL Precedence - Via pluggable screw terminals. -60 dB: MIC 1, 2, 3, 4, 5/TEL, 6/AUX 1, AUX 2
• Power In/Pre Out - In 1V/Out 1V via RCA jacks
• Phantom Power - 13V DC
• Lo-Cut - -3 dB @ 85 Hz
• Loudness Contour - +8 dB @ 100 Hz, +4 dB @ 10 kHz (AUX 1 & 2 control at 1/4 CW position)
• Parametric Equalizer - 5-bands with independent GAIN, FREQ and Q controls
• Overload Protection - Electronic with automatic reset
• Thermal Protection - Thermistor attached to heat sink
• Dimensions - 16-1/2" W x 3-1/2" H x 13-1/2" D
• Shipping Weight - 14 lbs.

PS60 Specifications PDF