QXP-W6-AX200 QNAP WiFi 6 PCIe Wireless Card with Antenna & Brackets

The QXP-W6-AX200 is a PCIe Gen 2x1 Wi-Fi 6 wireless adapter with an Intel Wi-Fi 6 AX200 module that supports the IEEE 802.11ax standard (backwards compatible with 802.11a/b/g/n/ac), MIMO 2Tx2R, MU-MIMO TX/RX and Bluetooth 5.0. The QXP-W6-AX200 can be installed in a QNAP NAS, or Windows/Linux PC to provide fast Wi-Fi 6 connection speeds. The QXP-W6-AX200 can also be used with Wi-Fi 6 router to deploy Wi-Fi 6 network environment. A full-height bracket is pre-installed on the QXP-W6-AX200 and two low-profile brackets are also included.

Specifications

• Wi-Fi 6 PCIe card
• Controller IC - Intel AX200 wireless module
• PCIe interface - PCIe Gen2 x1
• Theoretical maximum performance - 2.4Gbps (5GHz)
• Antenna - 2T x 2R
• Supported operating systems - QTS 4.4.3 or later; 64-bit Windows 10 PC (download and install driver from Intel website); Linux kernel 5.1 or later (download and install driver from Intel website)
• Hardware requirement - NAS or PC with a PCIe slot, 64-bit processor and operating system
• Package contents - 1 x QXP-W6-AX200 card (GC-WBAX200 QNAP edition, a full-height bracket is pre-installed); 1 x installation guide; 2 x half-height low-profile brackets (a standard bracket and a flat bracket for NAS); Windows 10 driver CD
• Operating temperature - 0°C ~ 40°C (32°F ~ 104°F)
• NAS Software Spec - Supports QTS 4.4.3 or later
• Security Protocol - No Auth / WEP / WPA-Personal / WPA2-Personal
• Supports the Captive Portal authentication method - Access WiFi via the configuration by Qfinder utility / Browser Station

QXP-W6-AX200 Specifications PDF