VIS-LRPOE24-2A InVid Tech 24-Port PoE Switch with 2x Gigabit Combo Port

Specifications

• Item - VIS-LRPOE24-2A
• Ports - 24×10/100Base-TX autosensing Ethernet ports (all support PoE) 2×Gigabit combo port (RJ45 and SFP)
• Port attribute - 10/100/1000Mbit/s transfer rate, Half-duplex, full-duplex and auto-negotiation, Auto MDI/MDIX
• Standards - IEEE 802.3u 100BASE-TX, IEEE 802.3ab 1000BASE-T, IEEE 802.3z 1000BASE-X, ANSI/IEEE 802.3 NWay, IEEE 802.3x flow control, IEEE 802.3af PoE, IEEE 802.3at PoE
• MAC - 4K
• Packet forwarding rate - 6.55Mpps
• Switching capacity - 8.8Gbps
• Jumbo Frames - Support
• EXTEND mode
• Disabled: - all ports can communicate with each other, and monitoring optimization is disabled
• Enabled: - Downlink ports can only communicate with uplink ports, monitoring optimization is enabled, and transmission distance can be extended to up to 820 Feet
• Status LEDs - Link/Act (steady green): link is normalLink/Act (flashing green): data is being forwarded Link/Act (off): no link, PoE (steady orange): the port is powering a powered device properly PoE (off): the port is not connected to any powered device or is not supplying power, Power (steady green): AC input is normal Power (off): AC input is abnormal
• PoE - 802.3at/af Max PoE capacity: 400 W
• Consumption - ≤ 450 W
• AC voltage - 100-240 V
• Operating temperature - 32°F-104°F (0°C-40°C)
• Operating humidity - 10%-85%
• Storage temperature - 14°F-158°F (-10°C-70°C)
• Storage humidity - 10%-90%
• Dimensions (W×D×H) - 17.3 x 11 x 1.7” (440 x 280 x 44mm)

VIS-LRPOE24-2A Specifications PDF