SG-1 GRI Electronic Shockgard with Pulse - White

The Shockgard electronic shock sensors have been designed utilizing the most advanced microchip technology to provide reliable effective false alarm resistant protection.

The Shockgard offers a wide range of facilities including remote LED reset, first to latch indication and subsequent to alarm latch information. Other features include automatic relay reset and dual stage linear sensitivity adjustment by selection offering a broad band of sensitivity control .. Selectable pulse count and dual color LED information provides the installer with every aspect he requires for this type of detector.

Alarm output is provided by a pair of non-latching, normally closed relay contacts, opening for a minimum of 1 second on detection of an alarm. This relay is normally energized to give fail-safe operation in the event of a power loss. Indication is provided by a LED situated on the front cover. On board circuitry allows for the selection of momentary or latching indication. An automatic LED inhibit feature is also included. Latch enable and reset may be remotely controlled by standard control panel signals. The unit is fully protected from tampering by a N .C. switch operated by removal of the cover. Moisture repelling rubber grommets are provided with the Shockgards.

Specifications

• Supply Voltage - 9-15 Volt DC, Regulated
• Current Consumption Quiescent - 15mA Maximum
• 16mA Maximum Flashing LED - 16mA Maximum Flashing LED 27mA
• Temperature Limit - - 4F to +140F
• Relative Humidity at 86F - 0-90%
• Sensitivity Setting - Dual Stage Potentiometer
• Latching/Non Latching - 1st + Subsequent or Any + 6 Wire
• Indicator - Two Color LED
• Dimensions - 23 x 25 x 86 mm
• Relay Contact Rating - 150mA 24V Resistive 10 Ohm 1/4 Watt
• Time Relay Open in Alarm - 1 Second Minimum
• Pulse Count - 2, 4 or 6
• Max No. of units on any Latch - 80
• Max. No of units on 1st to Latch - 10

SG-1 Specifications PDF