EFLOW104NK8DQP Altronix 8 Channel 6Amp 12VDC/24VDC Access Control Power Supply in UL Listed NEMA 1 Indoor 12" W x 15.5" H x 4.5" D Steel Electrical Enclosure

Altronix eFlow104NK8DQP converts a 120VAC 60Hz input into eight (8) PTC protected power-limited outputs. Outputs are individually selectable, providing 12VDC or 5VDC up to 6A and/or 24VDC up to 10A (240W total power) for access control panels, door locks, and ancillary devices. Unit includes an unswitched aux. output. It also offers a suite of features that includes fire alarm disconnect, over voltage protection, and low power disconnect which prevents deep discharge of stand-by batteries. Networkable power distribution module facilitates monitoring, reporting, and control of the supervised DC power supply/charger over the network. It reports diagnostics via Email and Windows Dashboard Alert notifications, greatly reducing system downtime and eliminating unnecessary service calls.

Specifications

Power Supply (eFlow104NB)

Input

• Voltage - 120VAC, 60Hz, 4.5A max
• Input Fuse - 6.3A/250V

Outputs

• Voltage - 24VDC @ 10A
• Auxiliary - 1A (unswitched)
• Protection - Overvoltage protection, Filtered and regulated

Battery Backup

• Type - Sealed lead acid or gel type
• Fuse Rating - 10A @ 32VDC
• Failover - Upon AC loss, instantaneous

Fire Alarm Disconnect

• Supervised - Latching or non-latching
• EOL - 10K Resistor

Supervision

• AC Failure - Form "C" contacts
• Battery - Form "C" contacts
• Low DC Power Shutdown - Shuts down DC output terminals if battery voltage drops below 70-75% for 24V units (depending on the power supply). Prevents deep battery discharge

Indicators (LED)

• AC Input - 120VAC is present
• DC Output - Powered
• Battery - Discharged or not connected

Voltage Regulator (VR6)

Input

• Voltage - 24VDC from eFlow104NB

Output

• Voltage - 12VDC
• Current - 6A continuous
• Other - Surge suppression

Indicators (LED)

• Input - 24VDC is present
• Output - Powered

Network Power Distribution Module (LINQ8PDCB)

Input

• Voltage - 24VDC from eFlow104NB and 5VDC or 12VDC from VR6
• Input Fuses - 15A / 32V

Outputs

• Eight (8) PTC protected outputs rated 2A
• Power output(s) can be locally or remotely controlled
• Surge suppresion
• Output PTCs - 2A

Status Monitoring

• Power Supply output voltage and load
• Voltage and load of each output
• FACP trigger and reset status
• Unit temperature (Celsius)
• Power Supply AC and Battery status
• Battery health

Indicators (LED)

• Bat Local - Charging current status
• FACP - Triggered / Released
• Input - Input signal
• Out1 - Out8 - Bi-colored LEDs indicate 12 or 24VDC

Reporting

• Windows Dashboard Alert messages
• E-mail notifications
• Event Log tracks history

Programming Features

• Power Supply(ies) voltage and load limits (High/Low)
• FACP trigger type (wet or dry-N.O./N.C.)
• Input Function (FACP reset/tamper)
• Output Reset Trigger (N.O./N.C.)
• Battery Monitor Configuration: Battery condition (Low/Normal/Missing), Service Date
• Configurable Output Relay(s)
• Individual Output Configuration: Device ID, Voltage and Current Limits (High/Low), FACP Trigger Setting (latching/non-latching/inactive), Battery Backup

Fire Alarm Interface

• Supervised FACP disconnect (Latching or Non-Latching)
• FACP reset (N.C. or N.O.)

Agency Listings

• CE - European Conformity

Physical and Environmental

• Dimensions (H x W x D) - 15.5" x 12" x 4.5" (393.7mm x 304.8mm x 114.3mm). Enclosure accommodates up to two (2) 12AH/12VDC batteries
• Product Weight - 9.4 lb. (4.26 kg)
• Shipping Weight - 10.5 lb. (4.76 kg)
• Temperature Operating - 0ºC to 49ºC (32ºF to 120ºF)
• Storage Temperature - -20ºC to 70ºC (-4ºF to 158ºF)
• Relative Humidity - 85% +/-5%
• BTU/Hr. (approx.) - 123 BTU/Hr

EFLOW104NK8DQP Specifications PDF

EFLOW104NK8DQP Manual