MAXFIT7F8APS Altronix Access Power Controller Kit - BC750 Enclosure Indoor 16.5"W x 20.5"H x 6.25"D, 19 Gauge - Grey

Altronix MaxFit7F8APS Access Power Controller distributes and switches power to access control systems and accessories. It converts a 120VAC, 60Hz input into eight (8) distributed 12VDC or 24VDC fuse protected outputs and eight (8) independently controlled 24VDC fuse protected relay outputs. Fail-Safe/Fail-Secure power outputs may be converted to dry form “C” contacts. Relays are activated by an open collector sink or normally open (NO) dry trigger input from an Access Control System, Keypad, Push Button, REX PIR, etc.

Specifications

Power Supply (eFlow104NB)

Input

• Voltage - 120VAC, 60Hz, 4.5A max
• Input Fuse - 6.3A/250V

Outputs

• Voltage - 24VDC @ 10A
• Auxiliary - 1A (unswitched)
• Protection - Overvoltage protection, Filtered and regulated

Battery Backup

• Type - Sealed lead acid or gel type
• Fuse Rating - 10A @ 32VDC
• Failover - Upon AC loss, instantaneous

Fire Alarm Disconnect

• Supervised - Latching or non-latching
• EOL - 10K Resistor

Supervision

• AC Failure - Form “C” contacts
• Battery - Form “C” contacts
• Low DC Power Shutdown - Shuts down DC output terminals if battery voltage drops below 70-75% for 24V units (depending on the power supply). Prevents deep battery discharge

Indicators (LED)

• AC Input - 120VAC is present
• DC Output - Powered
• Battery - Discharged or not connected

Dual Input Power Distribution Module (PDS8)

Input

• Voltage - 12VDC from VR6 and 24VDC from eFlow104NB
• Input Fuses - 10A / 32V

Outputs

• Voltage - 12VDC and/or 24VDC
• Any of the eight (8) power outputs are selectable to follow power Input 1 or Input 2. Individual outputs may be set to OFF position for servicing
• Output Fuses - 3A / 32V.

Indicators (LED)

• DC Output - Eight (8) individual output LEDs
• Green - 12VDC
• Red - 24VDC

Voltage Regulator (VR6)

Input

• Voltage - 24VDC @ 10A = Output: 12VDC @ 6A

Output

• 12VDC regulated output
• Output rating 6A max
• Surge suppression

Indicators (LED)

• Input - Indicates input voltage is present
• Output - Indicates normal operating condition

Access Power Controller (ACM8)

Input

• Voltage - 24VDC from eFlow104NB
• Main Fuse - 10A / 32V

Outputs

• Voltage - 24VDC
• Eight (8) independently controlled fused outputs
  • Fail-Safe and/or Fail-Secure power outputs. Form “C” Relays rated 28VAC or VDC @ 2.5A
  • Auxiliary power outputs (unswitched)
  • Any combination of the above
• Output Fuses - 3.5A / 32VDC

Indicators (LED)

• Red LEDs - Outputs are triggered (relays energized)
• Green LED - FACP disconnect is triggered

MaxFit7F8APS

Physical and Environmental

• Dimensions (H x W x D) - 20.5” x 16.5” x 6.25” (520.7 mm x 419.1 mm x 158.8 mm)
• Product Weight - 27.3 lb. (12.4 kg)
• Shipping Weight - 33.6 lb. (15.2 kg)
• Operating Temperature - 0ºC to 50ºC (32ºF to 122ºF)
• Storage Temperature - -20ºC to 70ºC (-4ºF to 158ºF)
• Relative Humidity - 85% +/-5%
• BTU/Hr. (approx.) - 145 BTU/Hr

MAXFIT7F8APS Specifications PDF

MAXFIT7F8APS Manual