TXG200 Platinum Tools NetXpert XG2 10G Network Tester Kit

The NetXpert XG2 can certify copper or fiber networks to 10G speeds using advanced Bit Error Rate Testing (BERT), pushing real data packets over the cable and measuring the results. This is real world testing, which proves the capabilities of new networks and helps to identify those older cable runs that can operate at higher speeds. The XG2 is also equipped with a full suite of active network tests and tools to speed network installs, including PoE testing and network testing over WiFi. The NetXpert XG2 is designed to be the one device that can perform all the tests you need during an install, simplifying and speeding up the process.

Specifications

• Length Measurement - Time Domain Reflectomoetry
• Output Connections - 8 - Position Shielded Modular Jack (Data) 2 x 10Gb SFP+ (Fiber)
• Interfaces - USB Type A
• Languages - EN, FR, ESP, DEU, ITA
• Temperature - Operating: -10 to 60™C Storage: -20 to 50™C When Charging: 10 to 40™C
• Humidity - 10 to 90% non-condensing
• Altitude - Operating: 10,000 Ft. (3,048m)
• Power Supply - Input 100-240VAC, Output 12VDC 2.5A
• Battery - Li-Ion, 7.8V 5500mAh - expected initial life 4hrs. typical at 1Gb speed
• Enclosure - Rubber armored impact-resistant plastic
• Size - Tester: 9.75 x 7 x 3" (245 x 177 x 73mm) Remote: 5.25 x 7 x 2.25" (130 x 177 x 55mm)
• Weight - Tester: 2.65lbs. (1.2Kg), Remote: 1.3lbs. (0.6Kg)
• Warranty - One Year
• Compliance - CE

Copper Cable Testing

• Ethernet speed certification to 1/2.5/5/10G
• Cable qualification to 1/2.5/5/10G
• Pass/fail cable test results
• TDR Cable length measurement
• Distance to opens and shorts
• TIA568A/B wire map testing
• Tone generator
• Custom cable labeling

Active Network Testing

• Works with copper, fiber, or WiFi
• Ping to a specific IP or URL address
• Link light to identify location on a switch
• Verifies DHCP connectivity and DNS
• Discovers CDP and LLDP Protocols
• Network Mapping & Traceroute
• VLAN Discovery

WiFi Testing

• Signal strength
• Internal, or external wifi via a dongle

PoE Testing

• Load, current and voltage
• PSE & PD class detection
• PoE cable pairs

TXG200 Specifications PDF