Categories > Browse by Brand > Altronix > Altronix Power Supply/Chargers w/ Controller > Altronix Access Power Controllers - Fused

EFLOW104NA8LX Altronix 8 Channel 10Amp 24VDC Access Control Power Supply in UL Listed NEMA 1 Indoor 12.25” W x 15.5” H x 4.5” D Steel Electrical Enclosure

SKU: EFLOW104NA8LX

Eight (8) independently controlled outputs
- Output options: a) Eight (8) Fail-Safe and/or Fail-Secure power outputs
- b) Eight (8) form “C” 5A rated relay outputs
- c) Any combination of the above
Eight (8) auxiliary power outputs (unswitched)
Output fuses are rated @ 3.5A
Filtered and electronically regulated outputs
Supervision
- AC Fail
- Battery Fail and Battery Presence
- Low power shutdown
Fire Alarm disconnect (latching or non-latching) is individually selectable for any or all of the eight (8) outputs
Alarm output relay indicates that FACP input is triggered
Fire Alarm disconnect input options
- a) Normally open (NO) or normally closed (NC) dry contact input
- b) Polarity reversal input from FACP signaling circuit

More details...

Ordering Notes: Dealers Only

MSRP Price: $686.00

Web Price: $490.00

Product Details

Altronix eFlowNA series distribute and switch power to access control systems and accessories. They convert a 120VAC, 60Hz input into eight (8) independently controlled 12VDC or 24VDC fuse protected outputs. These power outputs can be converted to dry form “C” contacts. Outputs are activated by an open collector sink or normally open (NO) dry trigger input from an Access Control System, Card Reader, Keypad, Push Button, PIR, etc. Units will route power to a variety of access control hardware devices including: Mag Locks, Electric Strikes, Magnetic Door Holders, etc. Outputs will operate in both Fail-Safe and/or Fail-Secure modes. The FACP Interface enables Emergency Egress, Alarm Monitoring, or may be used to trigger other auxiliary devices. The fire alarm disconnect feature is individually selectable for any or all of the eight (8) outputs.

Specifications

Input

Voltage - 120VAC, 60Hz
Input Fuse - Varies, see Reference Chart

Outputs

Voltage - 12VDC or 24VDC, see Reference Chart
Current - Varies, depending on the model
Protection - Fused 3.5A
Auxiliary - 2.5A (unswitched)
Other - Overvoltage protection, Filtered and regulated

Back-up Battery

Capacity - 12AH / 12VDC (1 or 2 within enclosure). 18AH / 40 AH / 65 AH (requires separate enclosure)
Type - Sealed lead acid or gel type
Fuse Rating - Varies, see Reference Chart
Failover - Upon AC loss, instantaneous

Fire Alarm Disconnect

Supervised - Latching or non-latching
EOL - 10K Resistor

Supervision

AC Failure - Form “C” contacts
Battery - Form “C” contacts
Low DC Power Shutdown - Shuts down DC output terminals if battery voltage drops below 71-73% for 12V units and 70-75% for 24V units (depending on the power supply). Prevents deep battery discharge

Fire Alarm Disconnect