FS-5000E TAKEX 33' Ultraviolet Flame Sensor Outdoor/Indoor Weather Resistant Relay Output N/O- N/C Power 10-30VDC

FS-5000E immediately detects ultraviolet rays contained in flames and activates an external output. Its weather proof construction allows FS-5000E to be used in outdoor applications, for fire prevention of areas where fire is prohibited.

Specifications

• Product name - Flame Sensor
• Model No. - FS-5000E
• Detection system - Ultraviolet rays detection (Detected wave length <185 to 260nm>)
• Detection area
  • Distance - 33ft. (10m) Gas Flame of Lighter in front of sensor : approx. 2.75”(7cm), 100ft. (30m) Flame of N-heptane on fire plate 15cm×15cm : approx. 23.62”(60cm) *The flame size is rough
  • Angle - Vertical : approx.75°(upward : 15°), Horizontal : approx.100°(downward : 60°)
  • Adjustment range - Vertical : downward 90°(horizontal - vertical), Horizontal : 180°
• Sensitivity
  • Sensitivity - H(100%), L(50%) [selectable by switch]
  • Detection timer - 1sec., 6sec., 15sec., 30sec. [selectable by switch]
• Power supply - 10V to 30VDC (non-polarity)
• Power consumption - 35mA or less
• Alarm output
  • Dry contact relay Form C (alarm : open/close)
  • Contact capacity : 30V (AC/DC) 0.5A or less (resistance load)
  • Operation time : The following are selectable
  • Detection time + off delay operation approx. 2sec. - 1min.
  • Detection time + off delay operation approx. 5sec. - 10min.
  • Output operation : The following are selectable
  • Same time as above continuous output
  • Same time as above intermittent output (Flashing)
  • Operation mode (day/night time discernment function) : 5lux (night time operation) - ∞ lux (day time operation) adjustment volume
• Alarm memory - LED(yellow) blinking and lights on /or LED disable. [selectable by switch]
• LED - Operation LED (red) : synchronous dry contact relay, Memory indication LED (yellow) : After blinking for 3 minutes and auto reset after 47 minutes or reset by manual
• Wiring - Lead wiring Power supply : 2 / dry contact : 3
• Ambient temp. range - - 4°F to +122°F (-20°C to + 50°C )
• Installation - Indoor, Outdoor
• Weight - approx. 19.3 oz (550g)
• Appearance - Sensor part : PC resin (white), Adjustment, mounting part : AES resin (white)
• Accessories
  • Tapping screwφ6×30 (SUS) : 4 pcs
  • Tapping screwφ4× 8 (SUS) : 1 pc
  • Band : 1 pc
  • Area mask seal : 1 pc
• Optional - Pole attachment (for the end) : BP-01, Pole attachment (for the middle) : BP-02, Vise :BV-03

FS-5000E Specifications PDF