PXB-200F TAKEX 660'/1320' Intelligent Double Modulated Quad Beam, Form-C Relay Output N/O N/C, 12 to 30VDC, IP65 Rating

Specifications

• Type - Quad Beam
• Detection system - Near infrared pulsed beam interruption system (TR-RE 4 beam simultaneous interruption)
• Infrared beam - Double modulation pulsed beam by LED
• Detection distance - Outdoor 660' (200m) or less
• Max. arrival distance - 6600' (2000m)
• Response time - 0.05 sec. to 0.7 sec. (Variable at pot)
• Frequency Selection - Single Channel
• Supply voltage - 12 to 30V DC (Non-polarity)
• Current consumption - 32mA or less
• Alarm output
  • Dry contact relay output form C
  • Contact action: Interruption time (Min. 2sec.)
  • Contact capacity: 30V (AC/DC) 0.25A (resistive load)
  • Protective resistor
• Environmental output
  • Dry contact relay output form C
  • Action: Activated when weather condition gets worse
  • Contact capacity: 30V (AC/DC) 0.25A (resistive load)
  • Protective resistor
• Tamper output
  • Dry contact relay (N.C.)
  • Action: Activated when cover is detached
  • Contact capacity: 30V (AC/DC) 0.1A (resistive load)
  • Protective resistor
• LED indicator
  • Alarm - Red LED (Receiver), ON: when an alarm is initiated
  • Attenuation - Red LED (Receiver), ON: when beam is attenuated
• Functions - Tone indicator, Environmental module, Monitor jack, Tamper, Response time adjustment, Upper/Lower beam switch, Wireless checker, Automatic gain control
• Adjustment - Horizontal: ±90°, Vertical: ±20°
• Mounting position - Outdoor, Indoor
• Wiring - Terminals
• Weight - Transmitter: 52.5oz (1500g), Receiver: 54.3oz (1550g)
• Appearance - Resin (wine red)

Environmental Specification

• Ambient temperature - -31°F to +151°F (-35°C to +66°C)
• IP Rating - IP65