MAXIMAL11K1V Altronix 2-EFLW4NBV P/S/ACM8/PD8UL

Altronix ACM8 converts one (1) 12 to 24 volt AC or DC input into eight (8) independently controlled fuse protected outputs. These power outputs can be converted to dry form “C" contacts. Outputs are activated by an open collector sink or normally open (NO) dry trigger input from an Access Control System, Card Reader, Keypad, Push Button, PIR, etc. ACM8 will route power to a variety of access control hardware devices including Mag Locks, Electric Strikes, Magnetic Door Holders, etc.

ACM8 Specifications

Input

• Voltage
  • 12 to 24 VAC or VDC operation (setting not required), 0.6A @ 12V, 0.3A @ 24V current consumption with all relays energized
  • Main fuse is rated at 10A
• Trigger Inputs - Eight (8) Access Control System trigger inputs:
  • Eight (8) normally open (NO) inputs
  • Eight (8) open collector sink inputs
  • Any combination of the above
• Input Options
  • One (1) common power input (board and lock power)
  • Two (2) isolated power inputs (one (1) for board power and one (1) for lock/accessory power)

Outputs

• Eight (8) independently controlled 2.5A outputs:
• Eight (8) Fail-Safe and/or Fail-Secure power outputs
• Eight (8) dry form “C" 5A rated relay outputs
• Any combination of the above
• Eight (8) auxiliary power outputs (unswitched)
• Output ratings - Output fuses are rated 3.5A each
• Note - Total output current is determined by the power supply, not to exceed a maximum of 10A total

Indicators (LED)

• Red LEDs - Outputs are triggered (relays energized)
• Green LED - FACP disconnect is triggered

Agency Listings

• UL
  • Access Control - UL294
• cUL
  • General Signaling Equipment Evaluated to CSA Standard C22.2 No.205-M1983

Physical and Environmental

• Enclosure Dimensions (H x W x D) - 8" x 4" x 0.75" (203.2mm x 114.3mm x 19.1mm)
• Product Weight - 0.65 lbs. (0.29 kg)
• Shipping Weight - 0.85 lbs. (0.39 kg)
• Temperature
  • Operating - 0°C to 49°C (32°F to 120°F)
  • Storage - -20°C to 70° C (-4°F to 158°F)
• Relative Humidity - 85% +/-5%
• BTU/Hr (approx.) - 4 BTU/Hr

PD8UL Specifications

Input

• Voltage Range - 12VDC or 24VDC, up to 10A or 24VAC or 28VAC, up to 12A.

Outputs

• Eight (8) fuse protected outputs.
• 2.5A per output max.
• Total output current should not exceed max current rating of power supply employed.
• Fuses are rated @ 3.5A/250V.

Indicators (LED)

• DC Output - Power LED.

Agency Listings

• UL - UL294 Access Control, UL603 Burglar Alarm, UL1481 Fire Alarm
• cUL - General Signaling Equipment Evaluated to CSA Standard C22.2 No.205-M1983., Power Supplies for Burglar Alarm Systems ULC-5318-96.

Physical and Environmental

• Dimensions (H x W x D) - 5.25" x 3.25" x 1" (133.4mm x 82.6mm x 25.4mm).
• Product Weight - 0.15 lbs. (0.07 kg).
• Shipping Weight - 0.25 lbs. (0.11 kg).
• Operating Temperature - 0°C to 49° (32°F to 120°F).
• Storage Temperature - -20°C to 70°C (-4°F to 158°F).
• Relative Humidity - 85% +/-5%.

ACM8 Specifications Sheet

PD8UL Specifications PDF