Dealers. First. Always.       |      The professional integrators favorite security distributor for over 20 years and counting.

Popular Everyday Products

NV-8PS42-PVD NVT 8-Channel Power Supply StubEQ Active Receiver Hub

  • Provides Class 2 SELV 28 VAC with up to 1 Amp/channel while receiving video transmission and delivering P/T/Z telemetry, all over a single 4-pair Cat5cable for each camera
  • Built-in distribution amplifier with 2 video outputs per channel
  • Full motion CCTV video at distances up to 1,500ft (460m) when used with any passive NVT transceiver
  • Adaptive StubEQ™ fully automatic 2-band equalization provides adjustment free equalization every time, no manual adjustments required
  • Frequency Response DC to 10 MHz
  • Automatic-reset fault protection; transient protection
  • Individually floating power outputs and differential video inputs ensure total ground-loop immunity
  • Diagnostic LEDs show load/no load, miswires, overload conditions, and video status
More details...
MSRP Price: $1,658.00

DWG Dealer Price : ---

Dealers - click here to set up your dealer account today.

Existing DWG Customers - Log In to view your current dealer pricing.

NV-8PS42-PVD NVT 8-Channel Power Supply StubEQ Active Receiver Hub
NV-8PS42-PVD NVT 8-Channel Power Supply StubEQ Active Receiver Hub
Previous Item   Next Item
Product Details

The 8-channel NV-8PS42-PVD is a key hybrid component that consolidates all CCTV system cabling using standard EIA/TIA 568B structured building wiring. Designed for installation in the IDF/Telecom Closet or MDF/Equipment Room, Power Supply StubEQ™ Active Receiver Hubs have individual floating 28VAC outputs that support at-distance camera loads up to 1 Amp per channel for cable runs up to 1,500ft (460m). A built-in StubEQ™ video receiver hub ensures a zero loss video signal for connection into a DVR or IP encoder. Standard features include: per channel automatic-reset fault protection, transient protection, ground loop free individually floating outputs, and power and video diagnostics. All NVT products are UL and cUL listed, are compliant with CE, RoHS, WEEE, and come with NVT’s lifetime warranty.


  • Model Number - NV-8PS42-PVD
  • Frequency response - DC to 10 MHz
  • Attenuation - 0.5 dB typ
  • Common-mode / Differential-mode rejection 15 KHz to 5 MHz - 60 dB typ
  • Impedance Coax/UTP - 75/100 ohm
  • Network Wiring - One four-pair Category cable
  • Power Supply - Fully isolated (floating) 28 VAC Class 2 SELV output at up to 1 Amp
  • Voltage - 115 / 230 VAC
  • Current - 2.5 / 1.25 Amps
  • Wattage - 250 Watts
  • Heat - 250 BTU/hour
  • Ambient Temperature - -4 to +122 °F (-20 to +50 °C)
  • Minimum airflow - 4ft3/min (0,1m3/min)
  • Humidity (non-condensing) - 0 to 95%
  • Transient Immunity - per ANSI 587 C62.41
  • Dimensions - 19 in wide, 1.73 in high, 8 in deep
  • Weight - 17lb (7,7kg)
  • Mounting - Rack mount “L” brackets for front, rear, or wall installations: rubber feet for desk installation
  • Cables - Eight 2ft (60cm) coax jumpers, Molded IEC power inlet cord 7ft (200cm)

NV-8PS42-PVD Specifications PDF

Product Reviews

Write your own review


Rate this product: