Dealers. First. Always.       |      The professional integrators favorite security distributor for over 20 years and counting.
DWG



Popular Everyday Products

AL1012ULACMCB Altronix 8 Output PTC Power Supply/Charger w/ Controller and Enclosure 12VDC @ 10 Amp

SKU: AL1012ULACMCB
  • Eight (8) independently controlled Fail-Safe and/or Fail-Secure power outputs
  • Class 2 Rated power-limited PTC Protected Outputs (auto-resettable)
  • Eight (8) auxiliary power outputs (unswitched)
  • Output fuses are rated @ 2.5A
  • Filtered and electronically regulated outputs
  • Supervision: - AC Fail, - Battery Fail and Battery Presence
  • Fire Alarm disconnect (latching or non-latching) is individually selectable for any or all of the eight (8) outputs
  • Alarm output relay indicates that FACP input is triggered
  • Fire Alarm disconnect input options: Normally open (NO) or normally closed (NC) dry contact input, Polarity reversal input from FACP signaling circuit
  • Built-in charger for sealed lead acid or gel type batteries
  • Instantaneous transfer to stand-by batteries
  • UL Listed in the U.S. and Canada
  • Lifetime Warranty / Made in the U.S.A
More details...
Ordering Notes: Dealers Only
MSRP Price: $604.00
Online Price: $431.00


DWG Dealer Price : ---


Dealers - click here to set up your dealer account today.

Existing DWG Customers - Log In to view your current dealer pricing.



AL1012ULACMCB Altronix 8 Output PTC Power Supply/Charger w/ Controller and Enclosure 12VDC @ 10 Amp
AL1012ULACMCB Altronix 8 Output PTC Power Supply/Charger w/ Controller and Enclosure 12VDC @ 10 Amp
Previous Item   Next Item
 
Product Details

Altronix AL1012ULACMCB converts a 115VAC 60Hz input into eight (8) independently controlled 12VDC Fail-Safe and/or Fail-Secure outputs with a total of 10A continuous supply current. Outputs are activated by an open collector sink or normally open (NO) dry trigger input from an Access Control System, Card Reader, Keypad, Push Button, PIR, etc. This unit will route power to a variety of access control hardware devices including Mag Locks, Electric Strikes, Magnetic Door Holders, etc.


Specifications


Input

  • Voltage Range - 115VAC, 60Hz
  • Fusing - Varies, see Reference Chart

Outputs

  • Class 2 Rated power-limited PTC Protected Outputs (auto-resettable)
  • Voltage - 12VDC or 24VDC, see Reference Chart
  • Current - Varies, depending on the model.
  • Protection - PTC 2.5A
  • Auxiliary - 3.5A (unswitched).
  • Other - Overvoltage protection.Filtered and regulated outputs

Back-up Battery (not included)

  • Capacity - 12AH / 12VDC (1 or 2 within enclosure). 18AH / 12VDC (requires larger "J" enclosure). 40 AH / 65 AH (requires separate enclosure)
  • Type - Sealed lead acid or gel type.
  • Fuse Rating - 15A @ 32VDC AL600ULACM(J) does not have a battery fuse
  • Failover - Upon AC loss, instantaneous

Fire Alarm Disconnect

  • Latching or non-latching, individually selectable for any or all of the eight (8) outputs

Supervision

  • AC Failure - Form "C" contacts
  • Battery - Form "C" contacts

Indicators (LED)

  • Input - 115VAC is present
  • DC Output - Powered.
  • Battery - Discharged or not connected
  • Relays - Individual LEDs indicate outputs are triggered (relays energized)
  • FACP - Indicates FACP disconnect is triggered.

Agency Listings

  • All Models
    • UL
      • UL294 - Access Control System Units
    • cUL
      • CSA C22.2 No.205 - Signal Equipment

Physical and Environmental

  • Dimensions (H x W x D) - 15.5" x 12" x 4.5" (393.7mm x 304.8mm x 114.3mm)
  • Product Weight - 10.7 lbs. (4.85 kg)
  • Shipping Weight - 12 lbs. (5.44 kg)
  • Temperature
    • Operating - 0C to 49C (32F to 120F)
    • Storage - -20C to 70C (-4F to 158F)
  • Relative Humidity BTU/Hr. (approx.)
    • 12VDC - 61
    • 24VDC - N/A

AL1024ULACMCB Spec Sheet

AL1024ULACMCB Installation Manual


Product Reviews

Write your own review

 

Rate this product: