NV-652R NVT Active UTP Video Receiver 12/24VAC/DC

The NVT Model NV-652R Video Receiver is an active (amplified) device that allows the transmission of real-time monochrome or color video on up to one mile (1,6km) using Category-2 or 3 Unshielded Twisted-Pair (UTP) telephone wire, or up to 1.5 miles (2,4km) (NTSC) using Category-5 or better.
The unparalleled interference rejection and low emissions of the Model NV-652R allow long run video signals to co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits. This allows the use of shared or existing cable plant. Ground-lifting ensures no annoying "hum-bars" when ground potential differences exist. With built-in transient protection, damaging voltage spike problems are eliminated. The built-in sharpness and brightness controls compensate for cable loss.

Specifications

Video

• Frequency response - DC to 10 MHz
• Adjustable Brightness & Sharpness Controls
• Attenuation - 0.5 dB typ
• Common-mode / Differential-mode rejection
  • 15 KHz to 5 MHz - 60 dB typ
• Impedance
  • Coax, female BNC - 75 ohms
  • UTP, Screw Terminal Block - 100 ohms

LED Indicators

• Blue "Power-On"
• Green "Active" signal present

Wire Type

• Network Wiring - One Unshielded Twisted Pair 24 - 16 AWG (0,5-1,31mm)
• Category Type - 2 or better
• Impedance - 100 ± 20 ohms
• DC Loop Resistance (24AWG) - 52 ohms per 1,000ft (18 ohms per 100m)
• Differential Capacitance - 19 pF/ft max (62 pF/m max)

Power

• 12 - 24VAC / DC (transformer not included) One floating power supply may power multiple NV-652R Receivers 100 mA max

Environmental

• Ambient temperature - +32 to +122°F (0 to +50 °C)
• Humidity (non-condensing) - 0 to 95%
• Transient Immunity - per ANSI / IEEE 587 C62.41

Mechanical

• Dimensions, excluding brackets and connectors - 3.00 x 1.54 x 1.10in (76 x 39 x 28mm)
• Packaged weight - 4.0 oz (100 g)
• Material - Black ABS
• Mounting - Two 0.175 in (4,4mm) diameter holes 2.5in (63,5mm) apart

NV-652R Specifications PDF