500019 MuxLab VideoEase Analog Audio Balun

The Analog Audio Balun allows any unbalancedanalog audio signal to be transmitted via a singleunshielded twisted pair (UTP) cable for moreversatile cabling. Used in pairs, the Audio Balun eliminates costlyand bulky coax cable, allowing consumer andcommercial audio equipment to be connectedusing standard premises wiring techniques

Specifications

• Environment - Unbalanced analog mono or stereo audio
• Devices - DVD, VCR, Camcorders, audio mixers, audio matrix switchers, audio splitters,audio distribution amplifiers, boosters, Hi-Fi, microphones, home theatre, andother commercial or consumer analog audio equipment
• Transmission - Transparent to the user
• Bandwidth (3dB roll-off point)(400 Ω source & 50 kΩ receiver)
  • Up to 1,000 ft (305m) : 60Hz - 20 kHz
  • 1,000 ft (305m) to 5,000 ft (1.5 km) : 100Hz - 20 kHz
• Maximum Input Level - 1.1Vp-p (+20 dBu, unbalanced < 1% THD)
• Insertion Loss per Balun Pair - Less than 1 dB per pair over the frequency range
• Common Mode Rejection (CMMR) - Greater than 60 dB @ 1 kHz
• Audio Source Impedance - 100 to 600 Ω
• Audio Receiver Impedance - 10 kΩ to 100 kΩ
• Impedance Transformation Ratio - Single unit : 4:1 (source:line)
• Cable – UTP
  • 24 gauge or lower solid copper twisted pair wire impedance : 100 ohms at 1
  • MHz. Maximum capacitance : 20 pf/foot
  • Attenuation : 6.6 dB/1000 ft at 1 MHz
• Connectors
  • One (1) RCA-Male connector
  • Two (2) screw terminals *
  * Phase error sensitive. Ensure straight-thru polarity in stereo audioapplications
• Temperature
  • Operating : 0° to 55° C
  • Storage :-20° to 85° C
  • Humidity: up to 95%
• Enclosure - Fire retardant plastic
• Dimensions - 2.30” x 0.62 x 0.62 (5.8 x 1.6 x 1.6 cm)
• Weight - 1.5 oz (42.5 gms)
• Regulatory - FCC, CE. US Design patent # D495,320
• Warranty - Lifetime
• Order Information - 500019 Analog Audio Balun

500019 Specification PDF

500019 Manual