The EX70 is a small, tough, compact, explosion-protected camera with performance optics for safe, effective surveillance in hazardous locations such as in oil and gas, and chemical facilities.
The EX70 is certified for ATEX Zone 1 or NEC Class I, Division 1 environments, the most stringent safety standards for explosion-protected performance. By definition, the Class I, Division 1 certifications signify that the EX70 is safe for use even in environments where explosive gases are present under normal operating conditions.
The EX70 incorporates high-strength design, featuring a construction of sand-cast, copper-free aluminum, strong enough to withstand an internal explosion. Threaded flame paths extinguish burning explosive gases and allow them to exit the housing harmlessly, without risking ignition in the external environment.
By meeting the rigorous requirements for Class I, Division 1 environments, the EX70 assures safe, effective performance at less hazardous Division 2 and Class II locations.
Rated NEMA 4X for both indoor and outdoor use, the EX70 carries a T6 temperature code, the lowest and safest rating. The EX70 is available with either a 3.6 mm or 6.0 mm fixed lens and is easy to install into any 12 VDC or 24 VAC system. It is a safe and effective surveillance solution for hazardous locations.
EX70C704-N Specifications PDF
Product Reviews
Write your own review
Rate this product:
