[DISCONTINUED] DCJ-3 VIDEOTEC Matrix, Mux and telemetry control keyboard

The DCJ, microprocessor controlled, allows you to interface and control SM42BSM82B, SM84B-SM164B and SM328B matrix. The operator can set up the SM42B-SM82B, SM84B-SM164B and SM328B matrix and can control their functions through the On Screen Display. A LCD display assists the operator during all the control functions. Furthermore, the DCJ allows you to control up to 999 telemetry receivers, the preset and patrol functions together with the DTRX3 or DTRXDC receivers. The three axis joystick allows a simple manual control and gives the ability to drive variable speed Pan & Tilt, and further to the most common high speed domes and can be used also for the menu set-up. Three serial RS485 communication lines are available: one for a video matrix and multiplexer and two used for the management of independent telemetry lines. A RS232 serial connection allows the firmware update from a PC.

• Joystick for Pan/Tilt/Zoom control and moving the cursor within the menus
• Display back-lit
• Ergonomic keys configuration
• Menu in 4 languages (Italian, English, French, German)
• Three password levels: connection, set-up, alarm reset
• Macro-functions keys (max 10): monitor selection, camera selection, selection of receiver associated to the camera, previously stored P&T scan position
• 9999 cameras, 999 telemetry receivers, 99 monitors
• Alarm and/or break communication buzzer
• Various accessory functions like keys enabling/disabling, energy saving, error alert, etc.
• Supplied with instruction manual, wide range power supply, 3 power cables, 6 RJ11 telephone cables, 6 jack shunt boxes RJ11
• Thermo resistant and shock proof ABS material
• Rubber keys
• Dimensions - 298x107x210mm (11.7x4.2x8.2in)
• 3 axis proportional joystick, with calibration and test features
• Display 4 lines of 20 characters
• 3 connectors RJ11
• Power supply jack connector
• DB9 connector for firmware update
• Configuration Dip-Switch
• Power supply
• IN 100-240Vac - OUT 12Vdc, 47/63Hz, 1A
• Three RS485 serial lines for communication
• one direct line with matrix and multiplexer to a maximum of 1200m (3937ft)
• two lines for two independent telemetry daisy chains, up 999 telemetry receivers to
a maximum of 1200m (3937ft)
• Serial connection RS232 to PC for firmware update, controllable to a maximum distance 15m (49ft)
• Video Line
• VIDEOTEC (1200, 9600, 19200, 38400 baudrate*)
• MACRO (1200, 9600, 19200, 38400 baudrate*)
• Telemetry Line
• VIDEOTEC (1200, 9600 baudrate*)
• MACRO (1200, 9600, 19200, 38400 baudrate*)
• PELCO D (2400, 4800, 9600, 19200 baudrate*)

*Baudrate - (also known as symbol rate and modulation rate) means the speed that data is transmitted. It is a derived value based on the number of symbols transmitted per second.

DCJ-3 Specifications PDF