ADAC422D American Dynamics Matrix Distribution Panel - Power Supply Sold Separately

The RS-422/RS-485 distribution panel amplifies either a RS-422 or RS-485 communications signal. With 16 outputs, the panel can accommodate home-run wiring, multiple daisy-chained links to SpeedDome programmable dome cameras or J-Boxes.
The panel also includes inputs for multiple MegaPower CPUs allowing you to maintain control from both the primary and backup CPUs, thereby providing a redundant solution. In addition, the panel can also accept RS-232 communication signals from MegaPower CPU or Intellex® digital video management systems where RS-232 is required. For diagnostic control you can monitor signal activities on each channel.

Specifications

Physical

• Dimensions (L x W x D) - 481 x 87 x 34 mm (18.9 x 3.4 x 1.3 in)
• Body Length - 445 mm (17.6 in)
• Weight - 0.75 kg (1.66 lbs)
• Mounting - Standard electronic rack (2U), EIA310-D (19 in) IEC 60297-1 (482.6 mm) Wall mount

Electrical

• Power Source - External power module Certified limited power source required Multiple panels may be connected to the maximum VA rating of the transformer
• Input - 12 to 30 V DC or AC Isolation not required
• Frequency - 50-60 Hz
• Power Consumption - 8 VA
• Diagnostic Indicators
  • Power On/Heartbeat - Green LED
  • Host A, B, C Data Detect - Yellow LED
  • Channel 1-16 Data Detect - Yellow LED
  • Channel 1-16 Line Status Test Switch - Red/Green LED
• Protection - Certified limited power source NEC Class 2 Internal primary current fuse Inrush limiting DC isolation
• Cable to Transformer- 5 m (16.5 ft) 18 AWG, 3-conductor
• Input Connector - Euro-style 3-pin removable plug 5.06 mm (0.2 in) terminal block
• Surge Protection
  • Transient Voltage Suppressors (TVS) - 60 V, 250 A, 1.5 J
  • Gas Discharge Tube Impulse Rate - 10 kA
• Design Tolerance
  • Input Voltage Minimum - 11 V DC or AC without dropout
  • Input Voltage Maximum - >36 V DC or AC
  • Input Frequency - 47 to 63 Hz
  • Allowable Dropout - 150 ms

Surge Protection

• Transient Voltage Suppressors (TVS)
  • Breakdown Voltage - 8.5 V ±20%
  • Peak Current - 40 A
  • Capacitance - 1200 pf at 1 kHz
• Gas Discharge Tube Impulse Rate
  • DC Breakdown Voltage - 90 V DC
  • Insulation Resistance - 10,000 mΩ
  • Capacitance - 2 pf max
  • 8/20 μsec Impulse Discharge Current - 10 kA
  • Ten 8/20 μsec Impulse Discharge Current - 5 kA

Environmental

• Operating Temperature - 10° to 50°C (14° to 122°F)
• Storage Temperature - 40° to 70°C (-40° to 158°F)
• Relative Humidity - 0 to 95% noncondensing

Regulatory

• EMC
  • 47 CFR, Part 15
  • EN 50130-4; EN55022
  • EN61000-3-2; EN61000-3-3
  • CISPR 22
• Safety - UL/IEC/EN/CSA C22.2.60950-1
• Environmental
  • RoHS 2002/95/EC
  • WEEE 2002/96/EC
  • IP code X0

ADAC422D Specifications PDF