FD2-F4-6 Pelco 3.6mm 650TVL Indoor Dome Analog Security Camera 18-32VAC/12VDC

The FD2 Series is Pelco’s general purpose indoor fixed dome camera. It is designed to provide superior picture quality over a wide range of conditions. The camera’s attractive size, combined with its numerous features, makes it the ideal camera for most indoor applications.

Specifications

• Image Sensor - Sony 1/3-Inch EXview HAD CCD II
• Signal Processing - Sony DSP, Effio-E
• Effective Pixels
  • NTSC - 976 (H) x 494 (V)
  • PAL - 976 (H) x 582 (V)
• Scanning Area - 5.58 (H) mm x 4.67 (V) mm, (0.22 x 0.18 inch)
• Scanning System
  • NTSC - 525 lines, 2:1 interlace
  • PAL - 625 lines, 2:1 interlace
• Scanning Frequency
  • NTSC
    • Horizontal, 15.734 kHz
    • Vertical, 59.94 Hz
  • PAL
    • Horizontal, 15.625 kHz
    • Vertical, 50.00 Hz
• Synchronization - Internal
• Horizontal Resolution - 650 TVL
• Minimum Illumination - f/2.0; 2,850°K; 30 IRE, Color 0.1 lux, Mono 0.1 lux
• IR Cut Filter - Fixed
• Dynamic Range - Gamma selectable (ATR)
• Low-Light Technology - Digital day/night
• Electronic Shutter Range
  • Auto/Manual 1/60 ~ 1/10,000 sec
  • Auto/Manual 1/50 ~ 1/10,000 sec
• Video Output - 1.0 Vp-p, NTSC/PAL composite, 75 ohms, BNC connector
• White Balance - ATW/Manual/Push/Push, Lock/User1/User2/Anti CR
• Signal-to-Noise Ratio - 48 dB (>52 dB by parameter adjustment)
• Lens - Fixed
• F-Number - f/2.0
• Focal Length
  • 2.8 mm (FD2-F3 Series)
  • 3.6 mm (FD2-F4 Series)
• Focus Range - ∞ to 1.2 m (3.9 ft)
• Horizontal - 90° at 2.8 mm (FD2-F3 Series)
• Angle of View - 72° at 3.6 mm (FD2-F4 Series)
• Vertical - 80° at 2.8 mm (FD2-F3 Series)
• Angle of View - 52° at 3.6 mm (FD2-F4 Series)
• Adjusting Angle
  • Panning Range - ±180°
  • Tilting Range - +75° to 0°
  • Rotation Range - ±180°
• Noise Reduction - 2D
• Motion Detection - Included (4 areas)
• Privacy Zones - Included (8 areas)

General

• Back Box Construction - ABS plastic
• Bubble Type - Lightly obscured
• Weight
  • Unit - 0.30 kg (0.66 lb)
  • Shipping - 0.60 kg (1.32 lb)

Electrical

• Power Requirement
  • NTSC - 18 to 32 VAC 60 Hz/12 VDC +10% to –15%
  • PAL - 18 to 32 VAC 50 Hz/12 VDC +10% to –15%
• Power Consumption
  • FD2-F, FD2-V, FD2-DV - 2.5 W
  • FD2-IRV - 4 W
  • FD2-DWV - 4.5 W
• Power Connector - 2-pin terminal block with screw terminals
• Video Connector - BNC
• Alarm Output - 2-pin terminal block with screw terminals (available on some models)

Environmental

• Operating Temperature - –10° to 50°C (14° to 122°F)
• Storage Temperature - –20° to 60°C (–40° to 140°F)
• Operating Humidity - 20% to 80%, noncondensing
• Storage Humidity - 20% to 90%, noncondensing

FD2-F4-6 Specifications PDF